.svg)
Tarimatec Composite Decking Sample
Free Canada-Wide Shipping
999
Samples ship from Toronto within 5–10 business days. Full board orders ship in 2–4 weeks for stock items, 8–12 weeks for special-order colours and quantities.
Sample dispatch: 5–10 business days
The Tarimatec Technical Manual is the spec-grade installation document used by builders, contractors, and architects to install Zinodeck composite decking to warranty standards. Includes joist spacing, fixing patterns, expansion gaps, edge detail, drainage, ventilation, and substrate requirements for both Hollow and Solid profiles. Required reading before installation — the 25-year warranty is conditional on technical-manual compliance.
Manufactured from Ecofiber Composite — a WPC composed of:
- Rice husk.
- Limestone
- Polyvinyl chloride (PVC).
Contains 40% recycled materials, including 22.5% factory scrap, 10.5% reclaimed sanding waste, and recovered end-of-life product.
Manufactured with 56.8% renewable energy and 100% recyclable end-of-life material.
Hollow boards:
150 × 27 × 2500 mm (standard Hollow profile)
180 × 27 × 2500 mm
High resistance to impact and abrasion.
Fire-resistant — ideal for outdoor settings.
Will not crack/ splinter or peel.
No additional treatment required.
Unaffected by insects and bacteria.
Resistant to changing weather conditions and the passage of time.
Anti-slip surface — ideal for exterior use
Low maintenance, easy to clean
Questions
Have a question about this product? Email info@zinodeck.ca or call +1 647-558-0018 — Zinodeck specialists answer same-day for projects across Canada.
Type your question — we’ll check if it’s already been answered, or route it to a Zinodeck specialist.
Sample Q&A
Q: Will Tarimatec composite decking hold up to Canadian freeze–thaw cycles? A: Yes. Tarimatec’s Ecofiber Stone Composite is engineered for extreme temperature and moisture variation and carries a 25-year limited warranty. For project-specific guidance, email info@zinodeck.ca or call +1 647-558-0018.
Thank you for reaching out and for your interest in our products. We do offer a 1" × 6" × 12' square edge profile for all Transcend Lineage colors (SKU: BC010612TLS01). If you need to rip a board length-wise, we recommend installing the cut edge against the house for the most aesthetically pleasing result.
Please note: cutting a curve into the material is considered a custom fabrication, and we do not provide recommendations for that process. For additional questions, feel free to contact our Customer Care Team at 1-800-289-8739 or customercare@zino.com
Kind regards,
Zino Customer Care Team
.png)